manualshive.com logo in svg

Panasonic UF-4500, Operating Instructions Manual

Share
Download
Panasonic UF-4500 Operating Instructions Manual Download Page 23

23

Inst

alling

 Y

o

ur 

M

ach

ine

Loading the Recording Paper

Paper Specifications

In general, most bond papers will produce excellent results. Most photocopy papers will also work very well. 
There are many "name" and "generic" brands of paper available. We recommend that you test various 
papers until you obtain the desired results. For detailed recommended paper specifications, (See page 180).

NOTE

1. If you neglect to change the Recording Paper Size setting in Fax Parameter No. 23, when a 

different paper is installed in the cassette, the unit will Stop printing after receiving an 

unmatched paper size (up to 3 pages) of Incoming Fax, then, the Recording Paper Size setting 

will automatically adjust to the proper size, and the unit resumes reprinting the Incoming Fax 
from the 1st page.

How to Load the Recording Paper

1

Pull the Paper Cassette until it clicks into 
place, then pull it out, lifting the front part of 
the cassette.

1. Load the paper into the Paper Cassette.

Slide the paper width and length guides 
until they lightly touch the stack of paper 
without bending the paper.

2. Insert the Paper Cassette into the 

machine, lifting the front part of the 
cassette. Then push it completely into 
the machine.

2

Paper Cassette

Approx. 2 kg

Caution for the Paper Cassette
 

•

 Do not drop the Paper Cassette.

 

•

 Hold the Paper Cassette with both hands when 

removing or installing. The Paper Cassette 
weighs approximately 2 kg (4.4 lb) when fully 
loaded with recording paper.

Summary of Contents for UF-4500









































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands