Panasonic TXL42DT60Y User Manual Download Page 69

Page: 69 / 214

- 69 -

●

The data recorded on the USB HDD with this TV can only be played back

on this TV. You cannot play back its contents with another TV (including

the TV of the same model number) or any equipment.

●

Do not turn the TV off, pull out the mains plug or remove the USB HDD

during operation (formatting, recording, etc.). Doing so may cause

malfunction of the device or damage the recorded data. (An electric

outage may also be a cause of malfunction.)

= Note =

●

Analogue TV programme cannot be recorded on the USB HDD.

●

The data broadcasting (MHEG, etc.), radio broadcasting will not be

recorded, and also the recording function will not work during the period

without any signal.

●

Not all the programmes can be recorded depending on the broadcaster

and service provider.

●

You cannot copy the recorded contents of the USB HDD.

●

The recorded content may not be played back properly while 2 recordings

are in progress.

●

For more information of the USB HDD

Recording Technical information USB HDD

Setting for USB HDD

Format and set up the USB HDD with this TV in order to use it for recording.
All the USB devices recognised as a mass storage device will be listed.

●

Please note that USB HDD will be formatted and all data in it will be

erased after this setup.

●

Before setting, connect the USB HDD and be sure to turn on the USB

HDD.

Recording USB HDD setup Preparations

1. Display the menu with

2. Select

Setup

USB Device Setup

with / and press

to access

3. Select the USB HDD for recording with / and press

to start setup

●

Some USB HDD may not be displayed.

●

To display information of the highlighted device

4. When the caution and confirmation screen for using USB HDD is

displayed, select

Yes

with / and press

to proceed

Summary of Contents for TXL42DT60Y























































































































































































































Search results

Summary of Contents for TXL42DT60Y

Reviews:

Related manuals for TXL42DT60Y

Brands by name

Popular brands

Panasonic TXL42DT60Y, User Manual

Search results

Summary of Contents for TXL42DT60Y

Reviews:

Related manuals for TXL42DT60Y

Brands by name

Popular brands