- 55 -
display the menu
2. Set
Auto Setup
with following control panel buttons
●
Move the cursor / select from a range of options / select the menu item
(up and down only)
●
Access the menu / store settings after adjustments have been made or
options have been set with INPUT/OK/HOLD for MENU button.
Manual Tuning
●
Normally use
Auto Setup
or
Update Channel List
to retune DVB channels.
●
If tuning has not been done completely or for adjusting the direction of the
aerial, use this function. (DVB)
●
All DVB channels found will be added to
Channel List
.
■
DVB-C
1. Enter the frequency with numeric buttons
●
Normally set
Symbol Rate
and
Service ID
to
Auto
.
2. Select
Start scan
with / and press
OK
to search
■
DVB-T
1. Select a channel with / and adjust frequency with / for each
channel
●
Set where the level of
Signal Quality
becomes the maximum.
2. Press
OK
to search
■
Analogue
Set Analogue channel manually after
Auto Setup
.
●
Set
Sound System
and
Colour System
, and then perform this function.
Normally set
Colour System
to
Auto
.
– SC1: PAL B, G, H / SECAM B, G
– SC2: PAL I
– SC3: PAL D, K / SECAM D, K
– F: SECAM L, L’
