- 40 -
■
How to operate services
In all cases, it is possible to navigate the pages using buttons on the remote
control, but because the commands available must apply to all manufacturers
of digital equipment, some on-screen commands may not correspond exactly
to the remote control buttons.
●
To exit a digital text service
TEXT
= Note =
●
As soon as you switch to a digital channel with links to a digital text
service, software is downloaded in the background over air to enable the
teletext function. This means that when switching to a digital channel, you
should wait for approximately 5 seconds before pressing
TEXT
- this will
allow the software to be downloaded. If you press
TEXT
before download
is complete, it will be ignored and you will have to press
TEXT
again when
the download is complete.
●
While navigating digital text service, you will find there is a short delay
when moving between pages while the page downloads. There is often a
prompt shown on the page (for example “Loading”) to let you know that
this is happening.
Viewing Teletext
1. Switch to teletext with
TEXT
●
Displays the index page (content varies depending on the
broadcasters).
●
Current / sub page numbers are displayed on the top left of the screen.
●
Time / date is displayed on the top right of the screen.
●
Colour bar is displayed on the bottom of the screen.
2. Select the page with numeric buttons, / or
(Coloured buttons)
●
To adjust contrast
1) Press
MENU
three times to display
Contrast
2) Adjust with / and press
OK
to set
●
To exit teletext
EXIT
