manualshive.com logo in svg

Panasonic TX-76PW100A, Operating Instructions Manual, Page: 43 / 48

Share
Download
Panasonic TX-76PW100A Operating Instructions Manual Download Page 43

43

Customer Information

To keep your Panasonic Television in good working order please observe the following warnings and
cautions. Please be careful with this television. Like all electrical equipment it can cause serious injury or
damage if it is mistreated

Danger
Do not

 insert foreign objects.

(Keep metal or easily inflammable
objects out of this television).

Danger:

 

High Voltage

Do not

 remove the rear cover, as

High Voltage components will be
exposed.

DO NOT

 touch the aerial cable

and metal parts of the television
when there is lightning around.
During storms switch the television
off. 

DO NOT

 leave in standby.

Remove the plug from the wall
socket.

Do not

 place any containers of

water or other liquids on or near
this television.

Do not 

place the TV in humid or

dusty locations, or areas exposed
to smoke or steam.
Avoid exposing the television to
direct sunlight or any other sources
of direct heat.

Do not 

stand or place heavy

objects on top of the television.

Remove the Power Plug from the
wall socket when the Television is
not going to be used for an
extended period of time.

In the advent of unusual operation
(e.g. odd sounds, smoke or
aromas), turn the television Off
and remove the power cord from
the wall socket. Then call the
Television Service Centre: this
may reduce the possibility of
expensive repair costs.

Danger

Always pull the plug out of the
wall outlet by holding the plug
itself.

Do not

 pull the plug by the power

cord.

Danger
Do not

 alter the power cord.

Do not

 use if the power cord or

plug is damaged or if the plug
does not fit tightly into the socket.

Do not

 allow the power cord to

come into contact with flame or
hot surfaces.

Do not

 place heavy objects on

the power cord.

Adequate ventilation is essential.
Allow a gap of at least 10cm
around the TV, even in a cabinet
or between shelves.

Do not

 subject the TV to any

physical shocks. Always remove
any connector cables when
moving the TV. When moving the
TV from one place to another
wrap it in something protective.

Turn the power OFF before
connecting other electrical
equipment.

Any external aerial should be
installed by a reputable qualified
installer and should comply with
Australian Standard AS1417.1.

Safety

First

Summary of Contents for TX-76PW100A

















































Reviews:

No comments