Energy saving functions
The TV can be eco-friendly using energy-saving functions.
The TV goes into Standby mode in the following conditions:
●
Eco Navigation
is set to
Set to Eco
.
●
Off Timer
is active.
●
No operation is performed for 4 hours while
Auto Standby
is set to
On
.
●
No signal is received and no operation is performed for 10 minutes while
No signal Power off
is set to
On
.
= Note =
●
This function does not affect the recording.
■
Auto Standby
1. Display the menu with
MENU
.
2. Select
Timer
>
Auto Standby
and press
OK
to access.
3. Select
On
/
Off
and press
OK
to set.
Auto Standby
(
On
/
Off
)
Automatically turns the TV to Standby mode for energy saving when no
operation is performed for 4 hours.
●
Automatic input switching with the connected equipment affects this
function and time-count resets.
●
A notification message will appear 3 minutes before going into Standby
mode.
●
Changing the default configuration may result in higher energy
consumption of the product.
■
No signal Power off
1. Display the menu with
MENU
.
2. Select
Timer
>
No signal Power off
and press
OK
to access.
3. Select
On
/
Off
and press
OK
to set.
- 49 -
Summary of Contents for TX-75FXW785
