Panasonic TX-75FXW785 Manual Download

Page: 270 / 342

Bluetooth devices

Bluetooth Setup

Only for the model supporting Bluetooth function

You can use Bluetooth keyboards , Bluetooth mouses and Bluetooth audio

devices (headphones, smartphone, etc.) with this TV by setting

Bluetooth

Setup

in the Setup Menu.

: HID (Human Interface Device Profile) compliant keyboards and mouses

can be used.

: A2DP (Advanced Audio Distribution Profile) and AVRCP (Audio Video

Remote Control Profile) compliant audio devices can be used.

1. Display the menu with

2. Select

Setup

Bluetooth Setup

and press

to access.

3. Select one of the following items and press

to access.

Devices

Bluetooth Audio Mode Setting

Bluetooth Audio Settings

4. Set the item and press

to store.

Devices

Searches the available device and displays the status.

●

Place the device within 50 cm from the TV while registration is in progress.

●

Turn the device on for registering. The setup for registration may be

required depending on the device. Read the manual of the device.

●

You cannot use two or more A2DP compliant audio devices

simultaneously.

Not paired

The device is not registered. Register the device by following the on-

screen instructions to use with this TV.

Connected

The device is registered and you can use with this TV.

Not connected

The device is already registered, but not connected to this TV. Check

the device is turned on and set within the available range.

- 270 -

Summary of Contents for TX-75FXW785























































































































































































































































































































































Search results

Summary of Contents for TX-75FXW785

Reviews:

Related manuals for TX-75FXW785

Brands by name

Popular brands

Panasonic TX-75FXW785, Manual

Search results

Summary of Contents for TX-75FXW785

Reviews:

Related manuals for TX-75FXW785

Brands by name

Popular brands