Panasonic TX-75FXW785 Manual Download

Page: 230 / 342

DVB-via-IP Server Settings

Only for the model supporting DVB-via-IP server function

■

Preparations

●

Ensure the network connections and network settings are completed.

Functions > DVB-via-IP > DVB-via-IP server connection

Network > Network settings

●

Ensure that

Dual Tuner Mode

is set to

LNB Configuration

Watching > Tuning and editing channels > Auto Setup

■

DVB-via-IP Server Settings

Selects TV signal and enables tuning in DVB-via-IP server function.
1. Display the menu with

2. Select

Network

DVB-via-IP Server Settings

and press

to access.

3. Select

DVB-S

DVB-C

DVB-T

and press

to set.

●

Selectable TV modes for client vary depending on the channels stored.

Watching > Tuning and editing channels > Auto Setup

4. Select

Enable DVB-via-IP server

and press

to access.

5. A confirmation screen is displayed and press

to set. (The TV

automatically restarts.)

●

Changing the default configuration may result in higher energy

consumption of the product.

●

LED turns to orange in Standby mode when this function is active.

= Note =

●

Dual tuner function (watching or recording 2 programmes simultaneously,

watching a programme while recording another programme, etc.) is not

available while using DVB-via-IP server function.

●

This function is not available when the TV is turned off with Mains Power

On / Off switch.

●

Due to network conditions or certain broadcaster restrictions, this function

may not be available.

- 230 -

Summary of Contents for TX-75FXW785























































































































































































































































































































































Search results

Summary of Contents for TX-75FXW785

Reviews:

Related manuals for TX-75FXW785

Brands by name

Popular brands

Panasonic TX-75FXW785, Manual

Search results

Summary of Contents for TX-75FXW785

Reviews:

Related manuals for TX-75FXW785

Brands by name

Popular brands