Panasonic TX-58DX902B, Ehelp

Page: 274 / 362

Common Interface
Caution
If the encrypted message is displayed on the screen, the correct Common
Interface (CI) Module and smart card that are required for this service are not
inserted.
■
How to insert CI module and smart card
●
Turn the TV off with Mains Power On / Off switch whenever inserting or
removing the CI module.
●
Depending on the model, it may be necessary to remove the terminal
cover / cable cover before inserting or removing the CI module.
●
If a smart card and a CI module come as a set, first insert the CI module,
then insert the smart card into the CI module.
●
Insert or remove the CI module completely in the correct direction as
shown.
●
Remove the CI module from the TV when placing the TV facing upward.
This may cause damages to the CI module and CI slot.
= Note =
●
There might be some CI modules in the market with older firmware
versions that do not work fully interoperable with this new CI+ v1.3 TV. In
this case, please contact your content provider.
- 274 -