Panasonic TX-50CX800E Ehelp Download Page 113

Page: 113 / 366

Source image format

If the picture appears to be abnormal, refer to the table of images that can be

seen for each

3D Mode Selection

and each source image format, and select

the correct 3D mode.

●

3D images are displayed correctly with the appropriate 3D formats shown

in the yellow boxes below.

  Source image format
  Side by Side
  Top and Bottom
  Normal format (2D)

3D Mode Selection

Original

Side by Side - 3D

Top and Bottom - 3D

2D→3D

●

Depending on the player or broadcast, the image may be different from the

above illustrations.

- 113 -

Summary of Contents for TX-50CX800E















































































































































































































































































































































































Search results

Summary of Contents for TX-50CX800E

Reviews:

Related manuals for TX-50CX800E

Brands by name

Popular brands

Panasonic TX-50CX800E, Ehelp

Search results

Summary of Contents for TX-50CX800E

Reviews:

Related manuals for TX-50CX800E

Brands by name

Popular brands