- 90 -
■
Analogue
Set Analogue channel manually after
Auto Setup
.
●
Set
Sound System
and
Colour System
, and then perform this function.
Normally set
Colour System
to
Auto
.
– SC1: PAL B, G, H / SECAM B, G
– SC2: PAL I
– SC3: PAL D, K / SECAM D, K
– F: SECAM L, L’
1. Select the channel position with
Numeric buttons
.
2. Select the channel with
Channel Up / Down
.
3. Search with / .
4. Select
Store
with / and press
OK
to set.
●
Use
Fine Tuning
to make small adjustments to the tuning of an individual
programme (affected by weather conditions, etc.).
●
If a VCR is connected only with the RF cable, select channel position
0
.
Update Channel List
By updating the DVB channel list, you can add new channels, delete removed
channels or change channel names and positions automatically.
●
The channel list is updated while keeping your settings in
Favourites Edit
,
Channel List
,
Child Lock
, etc.
●
Depending on the signal condition, the update may not work properly.
●
To update DVB-S channels, set
Search Mode
and
Scan Mode
before
updating.
1) Select
Search Mode
/
Scan Mode
with / and press
OK
to access.
2) Set each item with / and press
OK
to store.
3) After settings, select
Start scan
with / and press
OK
to search.
New Channel Message
Selects whether to give a notification message when a new DVB channel is
found or not.
●
When a notification message appears, you can perform
Update Channel
List
pressing
OK
.
