- 71 -
= Note =
●
Not valid in Analogue
●
Timer Programming
only works reliably if correct time information is
received via the signal from the broadcaster or service provider.
●
Depending on the progress of recording, analogue channel may not be
selected.
●
When recording programmes to the USB HDD, be sure to format the USB
HDD and enable it to record in
USB Device Setup
.
●
To set timer programming events of this TV on the network equipment
(smartphone, etc.) from outside the home network
Recording > Timer Programming > Remote recording
■
Signal Supported Recording
Signal Supported Recording
is
Timer Programming
which is controlled by
information from the TV Guide; if programme start and end times are changed
by the broadcaster, the timer event will follow the change. Note that
Signal
Supported Recording
only works reliably if correct information is received
from broadcasters.
●
The availability of this function depends on the country and TV mode you
select.
●
is displayed on the timer event if
Signal Supported Recording
is set.
= Note =
●
If you edit the start time or end time of a signal supported recording event
by more than 10 minutes, it will no longer follow the broadcaster’s changes
to the start or end time. The start and end times will become fixed.
