Panasonic TX-42ASE650 Ehelp Download Page 188

Page: 188 / 238

- 188 -

Common Interface

Caution

If the encrypted message is displayed on the screen, the correct Common

Interface (CI) Module and smart card that are required for this service are not

inserted.

■

How to insert CI module and smart card

●

Turn the TV off with Mains Power On / Off switch whenever inserting or

removing the CI module.

●

If a smart card and a CI module come as a set, first insert the CI module,

then insert the smart card into the CI module.

●

Insert or remove the CI module completely in the correct direction as

shown.

●

Remove the CI module from the TV when placing the TV facing upward.

This may cause damages to the CI module and CI slot.

= Note =

●

There might be some CI modules in the market with older firmware

versions that do not work fully interoperable with this new CI+ v1.3 TV. In

this case, please contact your content provider.

Summary of Contents for TX-42ASE650















































































































































































































































Search results

Summary of Contents for TX-42ASE650

Reviews:

Related manuals for TX-42ASE650

Brands by name

Popular brands

Panasonic TX-42ASE650, Ehelp

Search results

Summary of Contents for TX-42ASE650

Reviews:

Related manuals for TX-42ASE650

Brands by name

Popular brands