Panasonic TX-40CXW704, Ehelp, Page: 54 / 339

Watching external input
Connect the external equipment (VCR, DVD, etc.) and you can watch through
the input.
1. Display the input selection menu with
AV .
2. Select the input mode connected to the equipment and press OK to watch.
(The selected mode is displayed on the top left of the screen.)
●
TV receives input signals automatically connecting with SCART when
playback starts.
– Input signals are automatically identified by the SCART (pin 8) terminal.
– This function is also available for HDMI connections when
VIERA Link
is set to On .
Functions > VIERA Link “HDAVI Control™” > Easy playback
– When input mode is not switched automatically, perform as above or
check the setup of the equipment.
●
You can also select the input pressing AV . Press repeatedly until the
desired input is selected.
●
You can select COMPONENT and VIDEO in AV2 .
●
You can label or skip each input mode. Skipped inputs will not be
displayed when AV is pressed. ( Input Labels )
●
The remote control is capable of operating the content or external
equipment.
Watching > External equipment > Operating with TV’s remote control
●
To return to TV mode
TV
= Note =
●
If the external equipment has an aspect adjustment function, set it to 16:9 .
●
For details, read the manual of the equipment or ask your local dealer.
■
Input Labels
Accesses the input labels list to select the label of each input mode or set to
skip unconnected one for easier identification and selection in Input Selection ,
banner, etc.
Watching > Basic > Information banner
1. Display the menu with MENU .
2. Select Setup > Display Settings > Input Labels and press OK to access.
3. Set the item and press OK to set.
- 54 -