Panasonic TX-40CS630E, Ehelp, Page: 89 / 295

3D Mode Selection
You can change the viewing mode between 2D and 3D.
1. Display the menu with
MENU .
2. Select Picture > 3D Settings > 3D Mode and press OK to access.
3. Select the mode and press OK to set.
●
Items for 3D Mode Selection vary depending on the condition.
3D / 2D :
Displays the appropriate image as you desire without selecting 3D format.
●
This mode may not work properly depending on the source image
format. In this case, select the appropriate 3D format manually.
■
To select 3D format manually
When the format is not selected properly using 3D / 2D mode, use this
manual setting.
1. Display
3D Mode Selection (Manual) with (red) during above
operation.
2. Select the mode and press OK to set.
Original :
Displays the source image as it is.
●
Use to identify the format type of the source image.
Watching > 3D > Source image format
Side by Side - 3D / Side by Side - 2D / Top and Bottom - 3D /
Top and Bottom - 2D :
Displays the mode you select.
●
For digital signals
2D→3D :
Converts 2D images into 3D.
●
Please note the 3D images appear slightly different from the
originals.
●
Using this function for profit-making purposes, or publically showing
images converted from 2D to 3D in places such as shops, hotels,
etc. may infringe on the rights of the copyright holder protected
under copyright law.
- 89 -