Panasonic TX-39ASW604 Ehelp Download Page 88

Page: 88 / 226

- 88 -

Setting for USB HDD

Format and set up the USB HDD with this TV in order to use it for recording.
All the USB devices recognised as a mass storage device will be listed.

●

Please note that USB HDD will be formatted and all data in it will be

erased after this setup.

●

Before setting, connect the USB HDD and be sure to turn on the USB

HDD.

Recording > USB HDD setup > Preparations

1. Display the menu with

2. Select

Setup

USB Device Setup

with / and press

to access.

3. Select the USB HDD for recording with / and press

to start setup.

●

Some USB HDD may not be displayed.

●

To display information of the highlighted device

4. When the caution and confirmation screen for using USB HDD is

displayed, select

Yes

with / and press

to proceed.

5. When the confirmation screen of USB HDD name is displayed, select

Yes

with / and press

to set.

●

The name for the USB HDD is created automatically. If you want to edit

the name, select

Yes

1) Enter characters with / / / or

Numeric buttons

, and press

to set.

2) Press

BACK/RETURN

to store.

6. When the confirmation screen to enable USB HDD for recording is

displayed, select

Yes

with / and press

to set.

●

If another formatted USB HDD for recording already exists, this

confirmation screen will be displayed to switch to enable this USB HDD

for recording.

Summary of Contents for TX-39ASW604



































































































































































































































Search results

Summary of Contents for TX-39ASW604

Reviews:

Related manuals for TX-39ASW604

Brands by name

Popular brands

Panasonic TX-39ASW604, Ehelp

Search results

Summary of Contents for TX-39ASW604

Reviews:

Related manuals for TX-39ASW604

Brands by name

Popular brands