FIG. 15
8. Wedge A shown in Fig. 15 should be fixed within a range of
45° to the left of the vertical line as shown.
9. After inserting wedge A, insert wedges B, C and D.
The wedges should be set 90° apart from each other.
10. Be certain that the four wedges are firmly fixed and the
deflection yoke is tightly clamped in place otherwise the
deflection yoke may shift its position and cause a loss of
convergence and purity.
4.11. White Balance
Item/Preparation
Adjustment Procedure
1.
Select Service Mode 1.
2.
Aging should have been performed over 30 minutes
3.
Receive the white balance pattern.
4.
Picture menu : DYNAMIC NORMAL
AI : OFF
5.
Degauss the CRT face.
6.
Connect the photo sensors of the Colour Analyser to the
CRT.
Note:
CRT cut off adjustment is completed.
1.
Adjustment of Low Light
a.
Adjustment SUB BRIGHT, so that “Y” axis indicates 6.5
b.
Adjustment R-CUT OFF, so that y axis indicates 0.267 ±
0.010
c.
Adjustment B-CUT OFF, so that x axis indicates 0.255 ±
0.010
2.
Adjustment of High Light
a.
Adjust SUB BRIGHT, so that “Y” axis indicates 150.
b.
Adjust R-DRIVE, so that y axis indicates 0.272 ± 0.010
c.
Adjust B-DRIVE, so that x axis indicates 0.267 ± 0.010
15
TX-34P800R
Summary of Contents for TX-34P800R
