Panasonic TX-28PL1D, Operating Instructions Manual, Page: 9 / 32

9
The on screen selector keys that appear
for some aspect functions will clear after
a few seconds. If you subsequently
wish to select an operation then press
the Aspect key once more for the keys
to reappear.
The widescreen aspect ratios of
different films and programmes can
vary. If these are wider than a standard
16:9 aspect picture then a black band
may be visible at the top and bottom of
the screen.
If, in Panasonic Auto mode, you
experience problems with the screen
display size when playing back
widescreen format recordings from
your VCR then it is possible that the
tracking control of your VCR requires
adjustment (your VCR instruction book
will contain adjustment details).
16:9 (Full)
16:9 (Full) will display the picture at its
maximum size but with slight
elongation.
Just
Just mode will display a 4:3 picture at
maximum size but with aspect
correction applied to the centre of the
screen so that elongation is only
apparent at the left and right edges of
the screen. The size of the picture will
depend on the original signal
.
ASPECT CONTROLS
Blue key has been pressed to move picture upwards
VSize-- VSize+ VPos.-- VPos.+
Zoom
16:9 (Full)
16:9
Just
Just