Colour Television
TX-28LB10F
TX-28LB10F/S
EURO- 4H Chassis
SPECIFICATIONS
Power Source:
220-240V a.c., 50Hz
Power Consumption:
100W
Standby Power
Consumption:
1,4W
Aerial Impedance:
75
W
unbalanced, Coaxial Type
Receiving System:
PAL-I, B/G, H, D/K, PAL-525/60
SECAM B/G, D/K, L/L’
M.NTSC (AV only)
NTSC (AV only)
Receiving Channels:
VHF E2-E12
VHF H1-H2 (ITALY)
VHF A-H (ITALY)
VHF R1-R2
VHF R3-R5
VHF R6-R12
UHF E21-E69
CATV (S01-S05)
CATV S1-S10 (M1-M10)
CATV S11-S20 (U1-U10)
CATV S21-S41 (HYPERBAND)
Intermediate Frequency:
Video
38,9MHz, 33,9MHz
Sound
33,4MHz (B/G), 33,16MHz (A2)
33,05MHz (NICAM B/G,D/K,L)
32,4MHz (D/K),32,66MHz(CZ STEREO)
32,9MHz (I)
40,4MHz (L’), 39,75MHz (L’NICAM)
Colour
34,47MHz (PAL)
34,5MHz, 34,65MHz (SECAM)
38,3MHz, 38,15MHz (SECAM L’)
Video/Audio Terminals:
AUDIO MONITOR OUT
Audio (RCAx2)
500mV rms1k
W
AV1 IN
Video (21 pin)
1V p-p 75
W
Audio (21 pin)
500mV rms 10k
W
RGB (21 pin)
0,7V p-p 75
W
AV1 OUT
Video (21 pin)
1V p-p 75
W
Audio (21 pin)
500mV rms 1k
W
AV2 IN
Video (21 pin)
1V p-p 75
W
Audio (21 pin)
500mV rms 10k
W
S-Video IN
Y: 1V p-p 75
W
(21 pin)
C: 0,3V p-p 75
W
AV2 OUT
Video (21 pin)
1V p-p 75
W
Audio (21 pin)
500mV rms 1k
W
AV3 IN
Audio (RCAx2)
500mV rms10k
W
Video (RCAx1)
1V p-p 75
W
High Voltage:
26kV ±1kV
Picture Tube:
A66EAK075X54 66cm
Audio Output:
2x7W RMS, 2x15W MPO
8
W
Impedance
Headphones
8
W
Impedance
Accessories supplied:
Remote Control
2 x R6 (UM3) Batteries
Dimensions:
Height:
578mm
Width:
810mm
Depth:
468mm
Net Weight
:
32,5kg
Specifications are subject to change without notice.
Weights and dimensions shown are approximate.
NOTE:
This Service Manual should be used in conjunction with the
EURO-4H technical guide.
TECHNISCHE DATEN
Netzspannung:
220-240V a.c., 50Hz
Leistungsaufnahme:
100W
Standby
Leistungsaufnahme:
1,4W
Antennenimpedanz:
75
W
asymmetrisch, Koaxial-Typ
Empfangssystem:
PAL-I, B/G, H, D/K, PAL-525/60
SECAM B/G, D/K, L/L’
M.NTSC (nur AV Eingang)
NTSC (nur AV Eingang)
Empfangsbereiche:
VHF E2-E12
VHF H1-H2 (ITALY)
VHF A-H (ITALY)
VHF R1-R2
VHF R3-R5
VHF R6-R12
UHF E21-E69
CATV (S01-S05)
CATV S1-S10 (M1-M10)
CATV S11-S20 (U1-U10)
CATV S21-S41 (HYPERBAND)
Zwischenfrequenz:
Video
38,9MHz, 33,9MHz
Sound
33,4MHz (B/G), 33,16MHz (A2)
33,05MHz (NICAM B/G,D/K,L)
32,4MHz (D/K),32,66MHz(CZ STEREO)
32,9MHz (I)
40,4MHz (L’), 39,75MHz (L’NICAM)
Colour
34,47MHz (PAL)
34,5MHz, 34,65MHz (SECAM)
38,3MHz, 38,15MHz (SECAM L’))
Video/Audio Anschlüsse:
AUDIO MONITOR OUT
Audio (RCAx2)
500mV rms1k
W
AV1 EINGANG
Video (21 pin)
1V p-p 75
W
Audio (21 pin)
500mV rms 10k
W
RGB (21 pin)
0,7V p-p 75
W
AV1 AUSGANG
Video (21 pin)
1V p-p 75
W
Audio (21 pin)
500mV rms 1k
W
AV2 EINGANG
Video (21 pin)
1V p-p 75
W
Audio (21 pin)
500mV rms 10k
W
S-Video IN
Y: 1V p-p 75
W
(21 pin)
C: 0,3V p-p 75
W
AV2 AUSGANG
Video (21 pin)
1V p-p 75
W
Audio (21 pin)
500mV rms 1k
W
AV3 EINGANG
Audio (RCAx2)
500mV rms10k
W
Video (RCAx1)
1V p-p 75
W
Hochspannung:
26kV ±1kV
Bildrohre:
A66EAK075X54 66cm
Ton Ausgangsleistung:
2x7W RMS, 2x15W MPO
Lautsprecher
8
W
Impedanz
Kopfhörer:
8
W
Impedanz
Mitgel. Zubehör:
Fernbedienung
2 x R6 (UM3) Batterien
Abmessungen:
Höhe:
578mm
Breite:
810mm
Tiefe:
468mm
Gewicht:
32,5kg
Änderungen der Technisichen Daten vorbehalten.
Gewichte und Abmessungen sind Näherungsangaben.
Hinweis:
Bitte verwenden Sie das Service Manual zusammen mit dem
Technical Guide.
ORDER No. 02-SM-017
Summary of Contents for TX-28LB10F
