Panasonic TX-24FSW504 Manual Download Page 159

Page: 159 / 299

Network connections

Internet connection

A broadband network environment is required to use internet services.

●

If you do not have any broadband network services, please consult your

retailer for assistance.

●

Dial-up internet connections cannot be used.

●

Required speed (effective): at least 1.5 Mbps for SD (Standard Definition)

and 6 Mbps for HD (High Definition) picture quality, respectively. If the

transfer speed is not enough, content may not be played back properly.

■

Wireless connection

  Built-in wireless LAN (Rear of the TV)
  Access point
  Internet environment

■

Wired connection

ETHERNET terminal
LAN cable (Shielded)

●

Use Shielded Twist Pair (STP) LAN cable.

Internet environment

- 159 -

Summary of Contents for TX-24FSW504












































































































































































































































































































Search results

Summary of Contents for TX-24FSW504

Reviews:

Related manuals for TX-24FSW504

Brands by name

Popular brands

Panasonic TX-24FSW504, Manual

Search results

Summary of Contents for TX-24FSW504

Reviews:

Related manuals for TX-24FSW504

Brands by name

Popular brands