HDMI HDR Setting
1. Display the menu with
MENU
.
2. Select
Setup
>
HDMI HDR Setting
and press
OK
to access.
3. Set the item and press
OK
to store.
HDMI HDR Setting
(
On
/
Off
)
Set to
On
when the HDR device is connected to the TV.
●
Please turn
Off
this function if the image looks unnatural. This may occur
in some cases such as compatibility with the connected device or source
images.
●
Image may disappear for a few seconds when the setting is changed.
●
For HDMI
= Note =
●
Supporting HDR does not increase the peak brightness capabilities of the
TV panel.
●
The ability to send a non 4K HDR signal via HDMI depends fully on the
playback device.
●
The majority of 4K Blu-ray discs require HDCP2.2 on TV to play back
HDR, whereas the HDMI input on this TV support only HDCP1.4;
accordingly not all HDR contents are guaranteed to be enjoyed on the TV.
- 53 -
Summary of Contents for TX-24FS503E
