Panasonic TX-24FS503E User Manual Download Page 170

Page: 170 / 295

TV Remote App Settings

Sets to control the TV with the equipment (smartphone, etc.) connected to

your network.
1. Display the menu with

2. Select

Network

TV Remote App Settings

and press

to access.

3. Select one of the following items and press

to access.

TV Remote

Powered On by Apps

Networked Standby

Home

Streaming

Device to upload contents

Delete All Pairings

4. Set the item and press

to store.

TV Remote

(

Off

)

Enables controlling the TV from the network equipment (smartphone, etc.).

Powered On by Apps

(

Off

)

Enables turning the TV on from the network equipment (smartphone, etc.).

●

Depending on the network condition, you may have to turn the TV on with

Standby On / Off switch of the TV’s remote control.

●

Changing the default configuration may result in higher energy

consumption of the product.

●

LED turns to orange in Standby mode when

Powered On by Apps

is set to

Networked Standby

(

Off

)

Enables turning the TV on via the LAN cable or wireless LAN using a wake-up

message sent from the network equipment in the home network.

●

Changing the default configuration may result in higher energy

consumption of the product.

Home Streaming

(

Always

Only when powered on

)

Enables sharing the TV programme and content of this TV with the network

equipment (smartphone, etc.) in the home network.

●

Changing the default configuration may result in higher energy

consumption of the product.

- 170 -

Summary of Contents for TX-24FS503E








































































































































































































































































































Search results

Summary of Contents for TX-24FS503E

Reviews:

Related manuals for TX-24FS503E

Brands by name

Popular brands

Panasonic TX-24FS503E, User Manual

Search results

Summary of Contents for TX-24FS503E

Reviews:

Related manuals for TX-24FS503E

Brands by name

Popular brands