Panasonic TX-24FS503E User Manual Download Page 143

Page: 143 / 295

USB devices

●

It is recommended to connect the device to the TV’s USB port directly.

●

Some USB devices or USB HUB may not be used with this TV.

●

You cannot connect any devices using a USB card reader.

■

USB Flash Memory

USB Flash Memory format:

FAT16, FAT32 or exFAT

●

USB HDDs formatted on a PC are not guaranteed to work in Media Player.

■

USB HDD

●

The capacity of USB HDD that works with this TV is from 160 GB to 6 TB.

●

Connect the USB HDD to the mains socket to record and play back

properly with this TV.

●

Use the USB HDD formatted with this TV.

Recording > USB HDD setup > Setting for USB HDD

●

Regarding performance, not all USB HDDs are guaranteed.

- 143 -

Summary of Contents for TX-24FS503E








































































































































































































































































































Search results

Summary of Contents for TX-24FS503E

Reviews:

Related manuals for TX-24FS503E

Brands by name

Popular brands

Panasonic TX-24FS503E, User Manual

Search results

Summary of Contents for TX-24FS503E

Reviews:

Related manuals for TX-24FS503E

Brands by name

Popular brands