Panasonic TX-24CSW504 Manual Download Page 137

Page: 137 / 287

USB devices

●

It is recommended to connect the device to the TV’s USB port directly.

●

Some USB devices or USB HUB may not be used with this TV.

●

You cannot connect any devices using a USB card reader.

●

Additional information about the devices may be found on the following

website.
http://panasonic.net/viera/support (English only)

■

USB Flash Memory

USB Flash Memory format:

FAT16, FAT32 or exFAT

●

USB HDDs formatted on a PC are not guaranteed to work in Media Player.

■

USB HDD

●

The capacity of USB HDD that works with this TV is from 160 GB to 3 TB.

●

Connect the USB HDD to the mains socket to record and play back

properly with this TV.

●

Use the USB HDD formatted with this TV.

Recording > USB HDD setup > Setting for USB HDD

●

Regarding performance, not all USB HDDs are guaranteed. Check the

USB HDDs that have been tested for compatibility with this TV at the

following website.
http://panasonic.net/viera/support (English only)

- 137 -

Summary of Contents for TX-24CSW504
































































































































































































































































































Search results

Summary of Contents for TX-24CSW504

Reviews:

Panasonic TX-24CSW504, Manual, Page: 137 / 287

Search results

Summary of Contents for TX-24CSW504

Reviews: