120
LAN
NOTE
Even when a password is set in the Setup Utility and [Password on boot] is set to [Enabled], entering the password is
unnecessary for turning on or resuming the computer.
Connect the AC adaptor.
The Power On by LAN function is off under the following conditions:
• When you turn the computer off by sliding the power switch for four seconds or longer (e.g., after a hung-up).
• When you reattach the AC adaptor and battery pack to the computer after removing them.
The screen remains dark after the computer resumes from
sleep/
standby. The previous
screen display will be restored when you touch the keyboard, touch pad or screen.
Enabling the Power On by LAN function
The computer automatically turns from off to on when the computer is accessed from the network server via the internal LAN port.
1
Select [Allow] in [Power On by LAN] in the [Advanced] menu of the Setup Utility
).
2
In [Caution], press
Enter
.
3
Press
F10
, and then select [Yes] and press
Enter
.
4
Log on to Windows as an administrator.
5
Click (Start) - [Computer] - [System properties] - [Device Manager].
Click [start] - [Control Panel] - [Performance and Maintenance] - [System] -
[Hardware] - [Device Manager].
6
Double-click [Network adapters] and double-click [Intel(R) 82577LM Gigabit Network
Connection], and then click [Advanced].
7
Click [Enable PME] in [Property] and select [Enabled] in [Value].
8
Click [OK].
Power On by LAN/Wake Up from Wired LAN
Windows 7
Windows XP
Windows 7
Windows XP
