87
LAN
NOTE
z
Even when a password is set in the Setup Utility and [Password on boot] is set to [Enabled], entering the password is
unnecessary for turning on or resuming the computer.
z
Connect the AC adaptor.
z
The Power On by LAN function is off under the following conditions:
• When you turn the computer off by sliding the power switch for four seconds or longer (e.g., after a hung-up).
• When you reattach the AC adaptor and battery pack to the computer after removing them.
z
The screen remains dark after the computer resumes from sleep. The previous screen display will be restored when
you touch the keyboard, touch pad or touchscreen (only for CF-T8 series).
Enabling the Power On by LAN function
The computer automatically turns from off to on when the computer is accessed from the network server via the internal LAN
port.
1
Select [Allow] in [Power On by LAN] in the [Advanced] menu of the Setup Utility
(
).
2
In [Caution], press
Enter
.
3
Press
F10
, and then select [Yes] and press
Enter
.
4
Log on to Windows as an administrator.
5
Click (Start) - [Computer] - [System properties] - [Device Manager].
6
Double-click [Network adapters] and double-click [Intel(R) 82567LM Gigabit Network
Connection], and then click [Advanced].
7
Click [Enable PME] in [Property] and select [Enabled] in [Value].
z
The computer may accidentally turn on if the linkage status is changed. To prevent the accidental startup, make
the following setting.
Click [Wake on Settings] in [Property] and select [Wake on Magic Packet] in [Value].
8
Click [OK].
Power On by LAN/Wake Up from Wired LAN