Panasonic Toughbook CF-F8EWAZZJM Reference Manual Download

Page: 103 / 140

103

Setup Utility

Underlined items are the factory presets.

Main Configuration

Main Menu

System Date

• Day of the Week/Month/Day/Year.
• You can use

Tab

to move the cursor.

[xxx xx/xx/xxxx]

System Time

• 24-hr. style.
• You can use

Tab

to move the cursor.

[xx:xx:xx]

Touch Pad

Disabled
Enabled

Touchscreen Mode

• Only for CF-T8 Series

Touchscreen Mode
Tablet Mode
Auto

Current Status

• Only when [Touchscreen Mode] is set to [Auto].

Depending on the touch-
screen mode setting,
either “Touchscreen
Mode” or “Tablet Mode”
is displayed.

Fn/Ctrl Key

• Select whether to switch

with

Ctrl

functions, and vice versa on the internal keyboard.

• Do not attempt to replace the markings on the keys, or the keys themselves.

Normal
Replace

Display

• The display during the Windows start-up process. When an external display is not connected,

the information appears on the internal LCD even though [External Monitor] is set.

External Monitor

Internal LCD

Optical Drive Power

• Only for CF-F8/CF-W8 Series
• You can set the drive power to [On] or [Off] when the computer is started up.
• When set to [Off].

• From the next time you start the computer, you will be unable to start up from CD/

DVD drive. The disc cover cannot be opened until Windows has started. To start up
from the CD/DVD drive, set this to [On].

• If operations are resumed from hibernation while a disc is set, it may take about 20

seconds for operations to resume.

Off
On

Battery Charging Indicator

On Continuous
Flashing

Summary of Contents for Toughbook CF-F8EWAZZJM













































































































































Search results

Summary of Contents for Toughbook CF-F8EWAZZJM

Reviews:

Related manuals for Toughbook CF-F8EWAZZJM

Brands by name

Popular brands

Panasonic Toughbook CF-F8EWAZZJM, Reference Manual

Search results

Summary of Contents for Toughbook CF-F8EWAZZJM

Reviews:

Related manuals for Toughbook CF-F8EWAZZJM

Brands by name

Popular brands