Panasonic Toughbook CF-52EKMBDAM, Service Manual

Page: 60 / 88

9-3
7
9.2.22. Setting the Display Unit, BIOS HIGH PCB and SW LED MDC PCB
1. Set the Display Unit to the computer, and fix it using the four Screws <N4>. No.1 to No.4
2. Connect the Cable(gray) to JK7001 and the Cable(blue) to JK7003 on WWAN PCB.
3. Set the BIOS HIGH PCB, and fix it using the two Screws<N2>. No.1, No.2
4. Connect the Cable(black) to JK6103 and the Cable(white) to JK6102 on BIOS HIGH PCB.
5. Connect the two Cables to the Connector(CN5 and CN35).
<N4>
:No.1
Display unit
<N4>
:No.2
<N4>
:No.3
<N4>
:No.4
<N2>:No.1
Cable (black)
Cable (white) BIOS HIGH PCB
Speaker holder
<N2>:No.2
Cables
CN5 CN35