Panasonic Toughbook CF-31AAA7J1M Reference Manual Download

Page: 91 / 140

Hard Disk Drive

Pull the tab (C) of the hard disk drive and slide it out of the slot.

To insert

Insert the hard disk drive until it surely fits in the slot.

Close the cover and slide the latches (D and E) back to lock the cover.

Insert the battery pack (

page 31

Windows XP: standby

CAUTION

Confirm that the latches are surely locked so that it does not fall when you carry the computer.

NOTE

You can erase the data before changing the hard disk drive (

page 117

You can check that the hard disk is recognized or not in the [Information] menu of the Setup Utility (

page 95

). If the

hard disk is not recognized, turn off the computer and insert it again.

Summary of Contents for Toughbook CF-31AAA7J1M













































































































































Search results

Summary of Contents for Toughbook CF-31AAA7J1M

Reviews:

Related manuals for Toughbook CF-31AAA7J1M

Brands by name

Popular brands

Panasonic Toughbook CF-31AAA7J1M, Reference Manual

Search results

Summary of Contents for Toughbook CF-31AAA7J1M

Reviews:

Related manuals for Toughbook CF-31AAA7J1M

Brands by name

Popular brands