Panasonic Toughbook CF-31AAA7J1M Reference Manual Download Page 84

Page: 84 / 140

Wireless LAN

Enter the profile name and wireless network name (SSID), and make other necessary
changes, then click [OK].

Select the profile you set and click [Activate].

Click .

NOTE

You need to set the profile for each user.

The settings depend on the network environment. For further information, ask the system administrator or the person
in charge of the network.

<For model with Intel

Centrino

Advanced-N 6205>

For further information of Intel

PROSet/Wireless Software, refer to [Help] in the menu bar.

For further information of Atheros, click [Help] - [Atheros Client Utility Help] in the menu bar.

Click

on the notification area and click

Click [802.11a Enabled] or [802.11a Disabled].

A standard user needs to enter an administrator password.

NOTE

In some countries, communication using IEEE802.11a (5 GHz wireless LAN) standard is restricted by law.

The Wireless Switch Utility icon (

) indicates the on/off status of wireless LAN and/or wireless WAN, not the

setting of IEEE802.11a.

If IEEE802.11a is enabled or disabled while the computer is connected to an IEEE802.11b/g access point, the connec-
tion will be temporarily interrupted.

<Only for model with Intel

Centrino

Advanced-N 6205>

You can also change the IEEE802.11a setting in [Device Manager].

Click

(Start) - [Computer] - [System properties] - [Device Manager].

A standard user needs to enter an administrator password.

Double-click [Network adapters] and double-click [Intel(R) Centrino(R) Advanced-N 6205].

Enabling/Disabling the Wireless LAN Standard IEEE802.11a (802.11a)

Summary of Contents for Toughbook CF-31AAA7J1M













































































































































Search results

Summary of Contents for Toughbook CF-31AAA7J1M

Reviews:

Panasonic Toughbook CF-31AAA7J1M, Reference Manual, Page: 84 / 140

Search results

Summary of Contents for Toughbook CF-31AAA7J1M

Reviews: