Panasonic Toughbook CF-30C3DAZBM Reference Manual Download

Page: 8 / 108

Touchscreen

A standard user needs to perform the calibration as an administrator before performing the calibration for each user.

Calibration by an administrator

NOTE

At first, log on to Windows as an administrator, and perform this calibration.

Run [Tablet PC Settings].

Click

(Start) - [Control Panel] - [Hardware and Sound] - [Tablet PC Settings].

Click [Calibrate].

Using the stylus, touch each of the “+” target marks one by one.

Calibration by a standard user

NOTE

Perform the following calibration for each user.

Run [Tablet PC Settings].

Click

(Start) - [Control Panel] - [Hardware and Sound] - [Tablet PC Settings].

Click [Calibrate].

Using the stylus, touch each of the “+” target marks one by one, and then click [OK].

Perform the calibration for the orientation to be used.

Touchscreen Calibration

Summary of Contents for Toughbook CF-30C3DAZBM













































































































Search results

Summary of Contents for Toughbook CF-30C3DAZBM

Reviews:

Related manuals for Toughbook CF-30C3DAZBM

Brands by name

Popular brands

Panasonic Toughbook CF-30C3DAZBM, Reference Manual

Search results

Summary of Contents for Toughbook CF-30C3DAZBM

Reviews:

Related manuals for Toughbook CF-30C3DAZBM

Brands by name

Popular brands