Panasonic TH-P65VT30G, Service Manual

Page: 30 / 132

30
9.17. Remove the Stand bracket
1. Remove the Plasma panel section from the servicing
stand and lay on a flat surface such as a table (covered
by a soft cloth) with the Plasma panel surface facing
downward.
2. Unlock the cable clampers to free cable.
3. Remove the Stand bracket fastening screws (
×
6 ,
×
4
) and the Stand bracket.
9.18. Remove the K-Board
1. Remove the SP shield metal L. (See section 9.15.)
2. Remove the Stand bracket. (See section 9.17.)
3. Remove the screw (
×
1 ).
4. Remove the claws (
×
3 ).
5. Disconnect the connector (K1) and remove the K-Board
from the LED panel.
9.19. Remove the S-Board
1. Remove the SP shield metal L. (See section 9.15.)
2. Remove the screws (
×
2 ).
3. Disconnect the connector (S10) and remove the S-Board.
9.20. Remove the V-Board
1. Remove the SP shield metal R. (See section 9.15.)
2. Remove the Stand bracket. (See section 9.17.)
3. Remove the screw (
×
1 ) and remove the claws (
×
3
).
4. Disconnect the connector (V14) and remove the V-Board
from the 3D emitter panel.
9.21. Remove the Handles
1. Remove the SP shield metal (L, R). (See section 9.15.)
2. Remove the screws (
×
2 each) and remove the Han-
dles (L, R).
9.22. Remove the Bottom cabinet
assy
1. Remove the Speakers. (See section 9.15.)
2. Remove the Stand bracket. (See section 9.17.)
3. Remove the K, S and V-Board. (See section 9.18 - 20.)
4. Remove the Handles. (See section 9.21.)
5. Remove the screws (
×
4 ) and remove the Bottom cab-
inet assy.