Panasonic TH-P50ST60A, Quick Manual

Page: 35 / 172

- 35 -
2) Select the favourite with / and press OK to view
– To list favourite channels, set Favourites Edit .
Watching Tuning and editing channels Favourites Edit
●
To view more details of the programme (Digital TV)
1) Select the programme with / / /
2) Press
INFO to view
– Press again to return to TV Guide.
●
To exit TV Guide
EXIT
= Note =
●
When this TV is turned on for the first time, or the TV is switched off for
more than a week, it may take some time before TV Guide is completely
shown.
●
Digital TV and Analogue TV channels are displayed on the same TV Guide
screen. D means Digital TV channel and A means Analogue TV channel.
There will be no programme listings for Analogue channels.
Timer Programming
The Timer Programming menu allows you to choose programmes that you
want to remind watching or record to the USB HDD. At the correct time, the
TV will tune to the correct channel even if the TV is in Standby mode.
1. Select the forthcoming programme or channel with / / / and
press OK to access
2. Select USB HDD Rec. / Reminder with / and press OK to set
●
To check / change / cancel a timer programming event
Recording Timer Programming Editing timer programming
●
LED will turn to orange in Standby mode if Timer Programming is set.
●
To return to TV Guide
RETURN
●
If you select the current programme, a confirmation screen asking
whether you want to watch or record the programme appears. Select
Timer Programming with / and press OK to set USB HDD Rec. to
record from the time you finish the timer programming event setting.
= Note =
●
Not valid in Analogue TV
●
Timer Programming only works reliably if correct time information is
received via the signal from the broadcaster or service provider.