Panasonic TH-75GX880K, Service Manual

Page: 10 / 118

TH-75GX880K
10
6 CS Maintenance Menu
MPU controls the functions switching for each IICs through IIC bus in this chassis.
The following setting and adjustment can be adjusted by remote control in Service Menu.
6.1. How to enter into CS Maintenance Menu
6.1.1. Purpose
After exchange parts, check and adjust the contents of adjustment mode.
While pressing [VOLUME ( - )] button of the main unit, press [ RED ] button of the remote control three times within 2 seconds.
Note:
CS Maintenance Menu can not be entered when 3D signal input.
Input 2D signal to enter CS Maintenance Menu.
6.1.2. Key command
Press the Cursor key [Up/Down] on the remote control to select the functions.
6.1.3. How to exit
Press the [EXIT] button on the remote control.
6.2. OPT
1. Select [OPT] in CS Maintenance Menu.
2. Press [OK] button or Cursor key [Right] on the remote control.
Exit:
Press the [Exit] button or the [Return] button on the remote control.