Timer Programming
This function allows you to select programmes that you want to be reminded
to watch or record to the USB HDD.
1. Select the forthcoming programme and press
OK
to access.
2. Select
USB HDD Rec.
/
Reminder
and press
OK
to set.
●
To check / change / cancel a timer event
Recording > Timer Programming > Editing Timer Programming
●
LED turns to orange in Standby mode when
Timer Programming
is set.
●
To return to
TV Guide
RETURN
●
If you select the current programme, a confirmation screen asking
whether you want to watch or record the programme appears. Select
Timer Programming
and press
OK
to set
USB HDD Rec.
to record from
the time you finish the timer event setting.
= Note =
●
Not valid in Analogue TV
●
Timer Programming
only works reliably if correct time information is
received via the signal from the broadcaster or service provider.
●
No other channels can be selected while recording of
Timer Programming
is in progress.
●
When recording programmes to the USB HDD, be sure to format the USB
HDD and enable it to record in
USB Device Setup
.
- 67 -
Summary of Contents for TH-43DS630U
Page 219: ...Reset Picture Defaults Resets the current Picture Viewing Mode to the default settings 219...
Page 226: ...Reset Sound Defaults Resets the current Sound Mode to the default settings 226...
Page 230: ...VIERA Name Sets your favourite name for this TV Network Network settings VIERA Name 230...
Page 268: ...v 4 100...
