manualshive.com logo in svg

Panasonic TH-42LF25W, Service Manual, Page: 1 / 52

Share
Download
Panasonic TH-42LF25W Service Manual Download Page 1

© Panasonic Corporation 2011
Unauthorized copying and distribution is a violation
of law.

Order Number MTV1112129CE

FULL HD LCD Display

Model No.

TH-42LF25W
TH-47LF25W

TABLE OF CONTENTS

PAGE

PAGE

1 Safety Precautions

-----------------------------------------------

3

1.1. General Guidelines---------------------------------------- 3
1.2. Touch-Current Check ------------------------------------- 3

2 Warning

--------------------------------------------------------------

4

2.1. Prevention of Electrostatic Discharge (ESD)

to Electrostatically Sensitive (ES) Devices---------- 4

2.2. About lead free solder (PbF)---------------------------- 5

3 Service Navigation

-----------------------------------------------

6

3.1. Applicable signals ----------------------------------------- 6

4 Specifications

-----------------------------------------------------

8

5 Operating Instructions

------------------------------------------

9

6 Service Mode

-----------------------------------------------------

11

6.1. Service Menu Function (1) -----------------------------11
6.2. Service Menu Function (2) -----------------------------12
6.3. Service Mode Function (1) -----------------------------13
6.4. Service Mode Function (2) -----------------------------14

7 Troubleshooting Guide

----------------------------------------

15

8 Disassembly and Assembly Instructions

---------------

16

8.1. Flowchart for disassembly------------------------------16

8.2. Preparations----------------------------------------------- 17
8.3. Pedestal (option) removal------------------------------ 17
8.4. Rear cover removal-------------------------------------- 17
8.5. Replacement method for main board and jack

board -------------------------------------------------------- 18

8.6. Replacement method for Power board ------------- 19
8.7. Replacement method for AC cord bracket -------- 19
8.8. Cabinet back removal (42 type) ---------------------- 20
8.9. Cabinet back removal (47 type) ---------------------- 20

8.10. When removing the cabinet back with the

board connected ----------------------------------------- 20

8.11. Replacement method for speakers ------------------ 20

8.12. Key SW board replacement --------------------------- 20
8.13. Connector board removal ------------------------------ 21
8.14. LCD panel replacement -------------------------------- 21
8.15. Replacement method for RC+LED board---------- 22
8.16. Cabinet front replacement ----------------------------- 22
8.17. Cabinet back replacement ----------------------------- 23

9 Block Diagram

---------------------------------------------------

27

Summary of Contents for TH-42LF25W





















































Reviews:

No comments