Timer Programming
This function allows you to select programmes that you want to record to the
USB HDD.
1. Display
TV Guide
with
GUIDE
.
2. Select the forthcoming programme and press
OK
to access.
●
To check / change / cancel a timer event
Recording > Timer Programming > Editing Timer Programming
●
LED turns to orange in Standby mode when
Timer Programming
is set.
●
To return to
TV Guide
RETURN
●
If you select the current programme, a confirmation screen asking
whether you want to watch or record the programme appears. Select
Timer Programming
and press
OK
to set
USB HDD Rec.
to record from
the time you finish the timer event setting.
= Note =
●
Not valid in Analogue TV
●
Timer Programming
only works reliably if correct time information is
received via the signal from the broadcaster or service provider.
●
No other channels can be selected while recording of
Timer Programming
is in progress.
●
When recording programmes to the USB HDD, be sure to format the USB
HDD and enable it to record in
USB Device Setup
.
●
To set timer programming events of this TV on the network equipment
(smartphone, etc.) from outside the home network
Recording > Timer Programming > Remote recording
- 98 -
Summary of Contents for TH-40EX730Z
