Panasonic TH-32FS500Z Ehelp Download Page 136

Page: 136 / 279

Other settings

USB Sharing

You can copy the content from one device to another using the USB ports.

●

To enable this function, connect the source drive and destination drive to

the TV.

Media Player > Using Media Player > Information

Source drive

USB device which contains the data to be copied.

Destination drive

USB device to which the data is copied.

1. Display

Apps

with

APPS

2. Select

USB Sharing

and press

to access.

3. Select the drive from

Source drive

and press

to access.

4. Select the folder or file to copy and press

(red) to set.

●

To select all folders or files at once

(green)

5. Press to go to

Destination drive

6. Select the drive and press

to access.

●

You cannot select the source drive as the destination drive.

7. Select

Copy Here

and press

to access.

8. When a confirmation screen is displayed, select

Yes

and press

to start

copying.

●

The copy progress is shown on the top right of the TV screen. When

copying has finished,

Complete!!

is displayed.

●

To cancel the copying, select

USB Sharing

from

Apps

again.

●

To watch TV while data copying is in progress, press

- 136 -

Summary of Contents for TH-32FS500Z
























































































































































































































































































Search results

Summary of Contents for TH-32FS500Z

Reviews:

Related manuals for TH-32FS500Z

Brands by name

Popular brands

Panasonic TH-32FS500Z, Ehelp

Search results

Summary of Contents for TH-32FS500Z

Reviews:

Related manuals for TH-32FS500Z

Brands by name

Popular brands