- 137 -
3D settings
MENU
Menu
>
Picture
>
3D settings
Auto detect 3D
(
Auto 1
/
Auto 2
/
Off
)
Auto 1
:
Switches to 3D display when 3D indication is available (HDMI (3D),
AVCHD file, etc.)
Auto 2
:
Same as Auto 1. Also detects 3D signal by identifying similar image in
side-by-side or top-and-bottom 3D formats.
Note:
●
Choose 3D mode manually when auto detection is not available.
3D signal notification
(
On
/
Off
)
On
:
Displays a message according to the signal received by the
Auto
detect 3D
.
2D→3D depth
(
High
/
Mid
/
Low
)
Adjusts the simulated 3D depth perception effect of the 2D incoming signal.
3D adjustment
(On/Off)
Adjust the left eye versus right eye depth effect of the image. Set to
On
to
adjust
Effect
(
-3
to
+3
).
●
Gray-out in 2D mode
Left/Right swap
(
Normal
/
Swapped
)
Flips the phase of the image to give the correct perception of depth.
●
Gray-out in 2D mode
