4.3.1 Basic Network Settings
This screen allows you to change basic network settings such as whether to use a DHCP server, and the IP
address of the unit.
Note
•
Changes to the settings on this screen are applied when the message "Complete" appears after
clicking
[Save]
. Because the IP address of the unit will probably be changed if you change these
settings, you will not be able to continue using the Web user interface. To continue configuring the unit
from the Web user interface, log in to the Web user interface again after confirming the newly
assigned IP address of the unit using the phone user interface. In addition, if the IP address of the PC
from which you try to access the Web user interface has been changed, close the Web port once by
selecting
Off
for
Embedded Web
1.1.6.3 Before Accessing the Web User Interface
).
4.3.1.1 IP Addressing Mode
IP Addressing Mode
Description
Selects the IP addressing mode.
Value Range
•
IPv4
•
IPv6
•
IPv4&IPv6
Default Value
IPv4
Configuration File Reference
4.3.1.2 IPv4
Connection Mode
Description
Selects the IP address setting mode for IPv4.
4.3.1 Basic Network Settings
Document Version: 2017-07
Administrator Guide
67
