Panasonic T-Mobile KX-HDV130 Page 62 Manual Download

Page: 62 / 388

Value Range

IPL version ("nn.nnn" [n=0–9])
SIP software version ("[SIP: n.nn]" [n=0–9])

Firmware Version

Description

Indicates the version of the firmware that is currently installed on the
unit (reference only).

Value Range

Firmware version ("nn.nnn" [n=0–9]) (For KX-HDV130/
KX-HDV330/KX-HDV430)
Bank1 (Bank2): Firmware version ("nn.nnn" [n=0–9]) (For
KX-HDV230)

4.2.2 Network Status

This screen allows you to view the current network information of the unit, such as the MAC address, IP
address, Ethernet port status, etc.
Clicking

[Refresh]

updates the information displayed on the screen.

4.2.2.1 Network Common

MAC Address

Description

Indicates the MAC address of the unit (reference only).

Value Range

Not applicable.

Ethernet Link Status

Description

Indicates when either the Ethernet LAN port or the Ethernet PC port
is connected (reference only).

Value Range

Connected

IP Address Mode

Description

Indicates the current IP Address Mode.

4.2.2 Network Status

Administrator Guide

Document Version: 2017-07

Summary of Contents for T-Mobile KX-HDV130





































































































































































































































































































































































































Search results

Summary of Contents for T-Mobile KX-HDV130

Reviews:

Related manuals for T-Mobile KX-HDV130

Brands by name

Popular brands

Panasonic T-Mobile KX-HDV130, Manual

Search results

Summary of Contents for T-Mobile KX-HDV130

Reviews:

Related manuals for T-Mobile KX-HDV130

Brands by name

Popular brands