Value Range
3–50 (× 10 ms)
Note
•
This setting is subject to the following conditions:
–
This value must be greater than "
NOM_DELAY
"
–
This value must be greater than "
MIN_DELAY
"
–
"
NOM_DELAY
" must be greater than or equal to
"
MIN_DELAY
"
Default Value
20
MIN_DELAY_n
For details about parameter names end with "_n", see 5.2.1 Configuration File Parameters
Value Format
INTEGER
Description
Specifies the minimum delay, in 10-millisecond units, of the jitter
buffer.
Value Range
1 or 2 (× 10 ms)
Note
•
This setting is subject to the following conditions:
–
This value must be less than or equal to "
NOM_DELAY
"
–
This value must be less than "
MAX_DELAY
"
–
"
MAX_DELAY
" must be greater than "
NOM_DELAY
"
Default Value
2
NOM_DELAY_n
For details about parameter names end with "_n", see 5.2.1 Configuration File Parameters
Value Format
INTEGER
Description
Specifies the initial delay, in 10-millisecond units, of the jitter buffer.
Value Range
1–7 (× 10 ms)
Note
•
This setting is subject to the following conditions:
–
This value must be greater than or equal to "
MIN_DELAY
"
–
This value must be less than "
MAX_DELAY
"
Default Value
1
RTP_PORT_MIN
Value Format
INTEGER
Description
Specifies the lowest port number that the unit will use for RTP
packets.
Value Range
1024–59598 (only even)
5.3.26 RTP/RTCP/RTCP-XR Settings
Document Version: 2017-07
Administrator Guide
297
