Panasonic T-Mobile KX-HDV130 Administrator'S Manual Download Page 70

Page: 70 / 332

4.2.1 Version Information

This screen allows you to view the current version information such as the model number and the firmware
version of the unit.

4.2.1.1 Version Information

Model

Description

Indicates the model number of the unit (reference only).

Value Range

Model number

IPL Version

Description

Indicates the version of the IPL (Initial Program Load) that runs when
starting the unit and the SIP software version of the unit (reference
only).

Value Range

IPL version ("nn.nnn" [n=0–9])
SIP software version ("[SIP: n.nn]" [n=0–9])

Firmware Version

Description

Indicates the version of the firmware that is currently installed on the
unit (reference only).

Value Range

Firmware version ("nn.nnn" [n=0–9])

4.2.2 Network Status

This screen allows you to view the current network information of the unit, such as the MAC address, IP
address, Ethernet port status, etc.

Administrator Guide

Document Version 2015-12

4.2.2 Network Status

Summary of Contents for T-Mobile KX-HDV130













































































































































































































































































































































Search results

Summary of Contents for T-Mobile KX-HDV130

Reviews:

Related manuals for T-Mobile KX-HDV130

Brands by name

Popular brands

Panasonic T-Mobile KX-HDV130, Administrator'S Manual

Search results

Summary of Contents for T-Mobile KX-HDV130

Reviews:

Related manuals for T-Mobile KX-HDV130

Brands by name

Popular brands