Panasonic T-Mobile KX-HDV130 Administrator'S Manual Download

Page: 236 / 332

PORT_PUNCH_INTVL

Value Format

INTEGER

Description

Specifies the interval, in seconds, between transmissions of the Keep
Alive packet in order to maintain the NAT binding information for SIP
packet.

Value Range

0, 10–300
0: Disable

Default Value

Web User Interface Reference

Enable Port Punching for SIP (Page 118)

RTP_PORT_PUNCH_INTVL

Value Format

INTEGER

Description

Specifies the interval, in seconds, between transmissions of the Keep
Alive packet in order to maintain the NAT binding information for RTP
packet.

Value Range

0, 10–300
0: Disable

Default Value

Web User Interface Reference

Enable Port Punching for RTP (Page 119)

5.3.22 SIP Settings

SIP_USER_AGENT

Value Format

STRING

Description

Specifies the text string to send as the user agent in the headers of SIP
messages.

Value Range

Max. 64 characters

Note

•

If "{mac}" is included in this parameter, it will be replaced with
the unit’s MAC address in lower-case.

•

If "{MAC}" is included in this parameter, it will be replaced with
the unit’s MAC address in upper-case.

•

If "{MODEL}" is included in this parameter, it will be replaced
with the unit’s model name.

•

If "{fwver}" is included in this parameter, it will be replaced with
the firmware version of the unit.

•

If "{sipver}" is included in this parameter, it will be replaced with
the SIP software version of the unit.

Default Value

Panasonic {MODEL} hw01.00 fw{fwver} {mac}

236

Administrator Guide

Document Version 2015-12

5.3.22 SIP Settings

Summary of Contents for T-Mobile KX-HDV130













































































































































































































































































































































Search results

Summary of Contents for T-Mobile KX-HDV130

Reviews:

Related manuals for T-Mobile KX-HDV130

Brands by name

Popular brands

Panasonic T-Mobile KX-HDV130, Administrator'S Manual

Search results

Summary of Contents for T-Mobile KX-HDV130

Reviews:

Related manuals for T-Mobile KX-HDV130

Brands by name

Popular brands