Panasonic T-Mobile KX-HDV130 Administrator'S Manual Download Page 232

Page: 232 / 332

Description

Specifies the end time of DST (Summer Time) in minutes after 12:00
AM.

Note

•

This parameter is disabled when the
"

LOCAL_TIME_ZONE_POSIX

" parameter is specified.

Value Range

0–1439

Default Value

180

Web User Interface Reference

Time (Page 115)

5.3.19 Network Phonebook (Common)

ONLY_NPB_ENABLE

Value Format

BOOLEAN

Description

Specifies whether to be available the unit phonebook when the network
phonebook is enabled.

Value Range

•

: Not use unit phonebook

•

: Use unit phonebook

Default Value

NETWORK_SEARCH_ENABLE

Value Format

BOOLEAN

Description

Specifies whether to perform the phonebook search at the time of the
receiving the incoming or the searching the received log.

Value Range

•

: Enable phonebook search

•

: Disable

Default Value

5.3.20 Language Settings

AVAILABLE_LANGUAGE

Value Format

STRING

Description

Specifies the selectable language on the unit.

Value Range

en, es, fr, de, it, da, nl, sv, fi, el, hu, pt, pl, sk, cs, sh, ru, uk, tr, no, ro,
ct, kk, me

see

4.4.1.1 Selectable Language

Web User Interface Reference

IP Phone (Page 105)

232

Administrator Guide

Document Version 2015-12

5.3.20 Language Settings

Summary of Contents for T-Mobile KX-HDV130













































































































































































































































































































































Search results

Summary of Contents for T-Mobile KX-HDV130

Reviews:

Related manuals for T-Mobile KX-HDV130

Brands by name

Popular brands

Panasonic T-Mobile KX-HDV130, Administrator'S Manual

Search results

Summary of Contents for T-Mobile KX-HDV130

Reviews:

Related manuals for T-Mobile KX-HDV130

Brands by name

Popular brands