Panasonic T-Mobile KX-HDV130 Administrator'S Manual Download Page 151

Page: 151 / 332

Value Range

0, 200–2000 (0: No tone)

Note

•

If the value for this setting is "480,620", the unit will use a mixed
signal of a 480 Hz tone and a 620 Hz tone.

Default Value

425,0

Configuration File Reference

REORDER_TONE_FRQ (Page 286)

Tone Timings

Description

Specifies the pattern, in milliseconds, of reorder tones using up to 10
whole numbers (off 1, on 1, off 2, on 2…) separated by commas.

Note

•

It is recommended that you set a value of 60 milliseconds or
more for the first value (off 1).

Value Range

0–16000 (0: Infinite time)

Default Value

60,165,105

Note

•

Avoid setting 1–50 for any of the values.

Configuration File Reference

REORDER_TONE_TIMING (Page 287)

4.6.6 Import Phonebook

This screen allows you to import phonebook data from a PC to the specified unit. For details, see

6.1.1 Import/

Export Operation

Note

•

If the existing phonebook data has an entry with the same name and phone number as an imported
entry, the imported entry is not added as a new entry.

•

When you begin transferring the phonebook data, the "Now Processing File Data" screen is displayed,
and the screen is periodically reloaded. Depending on your Web browser, the screen might not reload

Document Version 2015-12

Administrator Guide

151

4.6.6 Import Phonebook

Summary of Contents for T-Mobile KX-HDV130













































































































































































































































































































































Search results

Summary of Contents for T-Mobile KX-HDV130

Reviews:

Related manuals for T-Mobile KX-HDV130

Brands by name

Popular brands

Panasonic T-Mobile KX-HDV130, Administrator'S Manual

Search results

Summary of Contents for T-Mobile KX-HDV130

Reviews:

Related manuals for T-Mobile KX-HDV130

Brands by name

Popular brands