Panasonic Switch-M12PWR, Operation Manual

Page: 187 / 240

187
4.7.10.c. Router Port Table Configuration
On the IGMP Snooping Configuration Menu, pressing "T" opens the Show
Router Port Table Menu as shown in Fig. 4-7-56.
Fig. 4-7-56 Router Port Table view
Screen Description
VLAN ID Displays VLAN ID.
Port List Displays the port list.
Available commands are listed below.
N Show the next page.
Press "N." The screen displays the next page.
P Show the previous page.
Press "P." The screen displays the previous page.
S Statically set a router port.
Press "S." The command prompt changes to "Add or Delete Static Multicast
Router Port (A/D)>." Press "A" to add a router port. Press "D" to delete it. After
the entry, the command prompt changes to "Enter port number>." Enter the
port number between 1 and 14.
L Dynamically specify a router port.
Press "L." The command prompt changes to "Set dynamic learning method
(P/I/B)>." Press "P" for PIM/DVMRP dynamic learning. Press "I" for IGMP
Query. Press "B" for both.
Q Return to the previous menu.
PN23129K/PN23129A Local Management System
IGMP Snooping Configuration -> Show Router Port Table Menu
Dynamic Detection: PIM and DVMRP
VLAN ID Port List
------- ---------------------------------------------------------------------
-------------------------------- <COMMAND> -----------------------------------
[N]ext Page [P]revious Page [Q]uit to previous menu
[S]et Static Router Port Set Dynamic [L]earning Method
Command>
Enter the character in square brackets to select option