Panasonic Switch-M12PWR, Operation Manual

Page: 141 / 240

141
4.7.5.g. Out-Profile Action Configuration Menu
On the Access Control Configuration Menu, pressing "O" opens the
Out-Profile Action Configuration Menu, as shown in Fig. 4-7-33. On this
screen, you can set Out-Profile.
Fig. 4-7-33 Out-Profile Configuration
Screen Description
Total Entries Displays the number of created out-profiles.
Index Displays the out-profile Index number.
Committed Rate
Displays the committed rate for out-profile.
(1Mbps/unit)
Displays the committed rate value.
Burst Size(KB) Displays the traffic burst size that can be transmitted exceeding the
committed rate. For burst size, 4K, 8K, 16K, 32K, and 64K are used.
Deny/Permit Displays deny/permit of packet.
Policed-DSCP DSCP marking status.
PN23129K/PN23129A Local Management System
Access Control Configuration -> Out-Profile Action Configuration Menu
Out-Profile Action: Total Entries : 0
Index Committed Rate Burst Size(KB) Deny/Permit Policed-DSCP
----- ---------------- -------------- ----------- ------------
Note: Committed Rate - 1Mbps/unit, Max available rate 10/100:100, Giga:1000
-------------------------------- <COMMAND> -----------------------------------
[N]ext Page [D]elete Out-Profile Action
[P]revious Page [M]odify Out-Profile Action
[C]reate Out-Profile Action [Q]uit to previous menu
Command>
Enter the character in square brackets to select option