Panasonic SP22P, Maintenance Manual

Page: 68 / 131

Page 2-2 193C-E-MMA02-A01-01
2-1 Items of Machine Parameter
The machine parameter can be checked. As data of the machine parameter is basically changed by
teaching, do not change by entering, except some set data.
Origin offset 1
The origin offset for each axis of X, Y, theta, lift, under holder, and squeegee is displayed.
Origin offset 2
Adjustment origin offset for each conveyor of front, center, and rear can be displayed.
Network
Setting for network with PT is carried out.
Status Indicator
Indicator and buzzer under various state can be set.
Judgment value
The judgment value (the value to be the standard to judge the error of board recognition) can be
set.
Camera
Offset of camera position and camera magnification can be checked.
Other offset
Each offset of mask holder, clearance, and board thickness can be checked.
Data check
Data of machine parameter can be checked.
Machine mainte
Information related to maintenance is displayed and checked all together for effective daily
maintenance.
Machine parameter teach
This can not be operated in the engineer mode.
(For service man)