Operation
14
If wireless connection between the unit and transmitter is not possible, wireless connection can be achieved by
pairing the units again.
1
Press and hold the [-PAIRING] button on the transmitter.
• The operation indicator on the transmitter blinks rapidly (cyan).
Do the following procedure with the power of the unit off.
2
Press and hold the [
Í
] button for about 6 seconds until the operation indicator (R)
blinks (blue) rapidly.
• Wireless connection pairing between this unit and the transmitter starts.
When the wireless connection is completed, the unit and the transmitter are in the following states:
If the transmitter is connected to a PC, you can use the app for use in Windows to change the settings for this
unit.
• Equalizer settings
• Adjusting speaker balance
• Turning off the operation indicators (lighting settings)
• Updating software
etc.
Refer to the following website for details about the app:
https://panasonic.jp/support/global/cs/audio/download/sse/
(This site is in English only.)
Pairing the unit and the transmitter again
This unit
Operation indicator (L)
Lights (cyan)
Operation indicator (R)
Lights (cyan)
Transmitter
Operation indicator
Lights (cyan)
Changing settings using the app for use in Windows (SOUNDSLAYER Engine)
